产品说明书


牙科修整用钨钢车针使用说明书

牙科修整用钨钢车针使用说明书

【产品名称】牙科修整用钨钢车针

Name: Tungsten carbide burs for dental trimming

【型号规格】型号:钨钢打磨车针、钨钢研磨车针,规格详见“牙科修整用车针型号规格列表”。

Model and specification: please find the details from “Model and specification list of burs for dental trimming”

【适用范围】配合牙科手机使用,用于口腔中牙齿、骨、修复体等硬质结构的抛光、打磨操作。

Application area: It can be used with dental handpieces to grind and polish hard structures such as teeth, bones and restorations in oral cavity.

【组成结构】由工作部分和柄部组成,工作部分是由硬质合金制成,柄部是硬质合金或不锈钢材料制成。

Structure: The working part is made of tungsten carbide, and the handle is made of tungsten carbide or stainless steel

【使用方法】本产品与牙科手机连接使用,每次使用时请预先进行运转检查。若发觉有松动、摆动等异常现象,请立即停止使用,并与原经销商联系。

Usage method: The product is used in conjunction with the dental handpiece. Please check the operation in advance each time before use. If loosening, swinging or other abnormal phenomenon is found, please stop using immediately and contact the original dealer

【禁忌事项】无。

None

【注意事项】

Cautions

1.使用前确认产品包装完整性。

1.Confirm the integrity of product packaging before use.

2.使用前请仔细检查产品,如发现产品有任何损坏或变形都请停止使用。

2.Check burs before use, if you find any damage or deformation of the product, please stop using it.

3.使用前请佩戴防护眼镜和噪音耳塞。

3.Wear eye-protective safety glasses and Sound insulation Earmuffs before use.

4.使用后请及时清洁,并保持车针干燥。

4.Disinfect and clean burs in time after use. Keep them dry. 

5.当发现车针磨损不锋利或车针切削力降低时请及时更换。

5.Please replace the burs in time if it’s not sharp.

6.牙齿经过打磨、抛光后必须经过清洗消毒方可使用。

6.After the teeth are grinded or polished, they must be cleaned and disinfected before use.

【贮    藏】车针应储存在干燥、稳定(无摔碰)、远离酸碱等有害化学物质及气体的常温-5℃-40℃、湿度小于90%的环境中。

Storage: The product should be stored in a dry, stable environment (without falling and touching) at room temperature of - 5 ℃ - 40 ℃ and humidity of less than 90%, away from acid, alkali and other harmful chemicals and gases.

【运    输】需按原厂包装运输,运输时按包装上标识所示摆放,勿重物挤压。

Transport: It should be transported according to the original factory packed. it should be placed according to the label on the package. Do not squeeze.

【生产企业】上海惠而顺精工科技发展有限公司

【Manufacturer】Shanghai WILSON Precision Technology Co., Ltd.

【住    所】上海市宝山区真陈路868号4幢一层、5幢

Address: 1F of #4,#5 workshop, No.868 Zhenchen Rd. Baoshan Urban Industry Park,Shanghai.

【生产地址】上海市宝山区真陈路868号8幢

Place of Production: #8 No.868 Zhenchen Rd. Baoshan Urban Industry Park,Shanghai

【使用期限】15年

Expiry date: 15 years

【联系方式】021-36162006

【Tel】 86-21-36162006

【售后服务单位】上海惠而顺精工科技发展有限公司

【After-sales Department】 Shanghai WILSON Precision Technology Co., Ltd.

【医疗器械备案凭证编号】沪宝械备20210012号

Number of filing certificate for medical equipment: No.HBXB20210012

【生产备案凭证编号】 沪宝食药监械生产备20212353号

Number of filing certificate for production: No.HBSYJXSCB20212353

【产品技术要求编号】

Product technical requirement No

【说明书编制日期】2020年12月28日

Preparation date of instruction】2020/12/28